[ICOM] IC-706

[nagel.david at sbcglobal.net]

I thought it was about that size but didn't know/remember. Now all we have to do is find one. Easy for Kelly in CA but not so easy in the US.

dave

--- On Thu, 9/9/10, Larry Benko <xxw0qe at comcast.net> wrote:

> From: Larry Benko <xxw0qe at comcast.net>
> Subject: Re: [ICOM] IC-706
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Date: Thursday, September 9, 2010, 11:34 PM
>   3.0x0.5mm x 6mm long
> 
> Same as for the IC-7000
> 
> Larry, W0QE
> 
> On 9/9/2010 10:02 PM, nagel.david at sbcglobal.net
> wrote:
> > Damn small and mine is missing also. If someone has
> the specs please post here.
> >
> > Thanks
> > Dave W2OVP
> >
> > --- On Thu, 9/9/10, Kelly Taylor<ve4xt at mts.net> 
> wrote:
> >
> >> From: Kelly Taylor<ve4xt at mts.net>
> >> Subject: [ICOM] IC-706
> >> To: icom at mailman.qth.net
> >> Date: Thursday, September 9, 2010, 10:30 PM
> >> Hi all,
> >> Does anyone know the dimensions of the screw that
> holds the
> >> separation cable to the body of the radio?
> >>
> >> 73, kelly
> >> ve4xt
> >> ----
> >> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> >> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> >> Icom FAQ: http://www.qsl.net/icom/
> >> To support QSL/QTH.net: http://www.qsl.net/donate.html
> >>
> > ----
> > Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > To support QSL/QTH.net: http://www.qsl.net/donate.html
> >
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>