[ICOM] 756 Pro3

[Adam Farson]

Hi Pete,

Thanks for letting me know. I am glad the "fix" turned out to be that easy!

Cheers for now, 73,
Adam VA7OJ/AB4OJ
 

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Pete
Sent: 2-Sep-10 19:23
To: ICOM Reflector
Subject: Re: [ICOM] 756 Pro3

Adam VA7OJ

Thanks for your suggestion about resetting the CPU.  I did that and the 20M
band is once again functioning.

Pete K1YSY


----- Original Message -----
From: "Adam Farson" <farson at shaw.ca>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Tuesday, August 31, 2010 3:37 PM
Subject: Re: [ICOM] 756 Pro3


> Hi Pete,
>
> This sounds like a failure in the BPF selection logic. It is possible that
> the 20m BPF is not being selected.
>
> Have you tried a CPU reset?
>
> Cheers for now, 73,
> Adam VA7OJ/AB4OJ
>
>
> -----Original Message-----
> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] 
> On
> Behalf Of Pete
> Sent: 31-Aug-10 12:32
> To: icom at mailman.qth.net
> Subject: [ICOM] 756 Pro3
>
> My Pro3 is about 6 yrs old.  It worked flawlessly until this morning. 
> When
> I tuned from 15M to 20M the radio ceased functioning.  By that, I mean no
> reception or transmission on 20M.  Wattmeter shows zero watts out.
>
> All the other bands work perfectly well.  Suggestions?
>
> Pete K1YSY
> ----
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
> 


----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html