[ICOM] Icom IC-765

[jeff partington]

what a novel concept...

--- On Wed, 10/27/10, Gary P. Fiber <gfiber at comcast.net> wrote:


From: Gary P. Fiber <gfiber at comcast.net>
Subject: Re: [ICOM] Icom IC-765
To: "ICOM Reflector" <icom at mailman.qth.net>
Date: Wednesday, October 27, 2010, 10:36 AM


The knurled like rubber cover on the knob should slip off then under it 
there is a metric set screw.
I don't know the Allen wrench size off hand but it should be a common 
one found in many metric Allen wrench sets.

-- 
Gary P. Fiber K8IZ

General Radio Telephone Operators License PG-19-6691,
with Shipboard Radar Endorsement.
Washington State Resident.

Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient (s) and may contain confidential and privileged information.
Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.


----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html