[ICOM] Tuning 7600

[k0bx at arrl.net]

Just put it in RTTY mode and hit the transmit button.  You can also use AM/FM.
I perfer the RTTY mode as it will give you a tone (if you have the monitor on) 
on your speaker.

Joe K0BX

 Stop the insanity!
Please do not add me to any distribution lists (Joke, Stories or Junk) without 
my permission.




________________________________
From: Gary Smith <wa1tjb at yahoo.com>
To: ICOM Reflector <icom at mailman.qth.net>
Sent: Wed, November 24, 2010 8:51:52 AM
Subject: [ICOM] Tuning 7600

I have a new Icom 7600 and am using it with a DX Engineering vertical antenna.  
It works OK with the automatic antenna tuner, but I want to use it with my 
Palstar external tuner and eventually connect it to a linear.  Is there a way, 
without using a key, to generate transmit power output so that I have drive 
power to tune the external tuner?  If not, I don't have a keyer; is there a way 
to construct a plug that will allow me to get output power for tuning?

Thanks and 73,

Gary
WA1TJB



      
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html