[ICOM] ??Screws??

[Gary P. Fiber]

Icom does not have case screws? or are they something different. We used 
to call them HF case screws. Most times the service manual will list 
them so people online with service manual on the various radios you need 
replacement screws may have sizes and even part numbers though if Icom 
does not have them those will do you no good.

If you haven't give Mike Hilton a call at Icom America Tech support. he 
has been there 10 years now and should know the answer, I broke him in 
when he started.

Gary K8IZ

On 11/17/2010 9:10 PM, Marc Ecker wrote:
> They don’t have the size information. Thought an
> icom guru on the reflector might know the size
> and length, which is what Im seeking (and
> thread type)
>
> --------------------------------------------------
> From:<hsgorden at comcast.net>
> Sent: Wednesday, November 17, 2010 9:32 PM
> To: "ICOM Reflector"<icom at mailman.qth.net>
> Subject: Re: [ICOM] ??Screws??
>
>>
>> Write to Icom - they will tell you the size and quote you a price?
>>
>>
>> ----- Original Message -----
>> From: "Marc Ecker"<mecker at peoplepc.com>
>> To: icom at mailman.qth.net
>> Sent: Wednesday, November 17, 2010 9:26:14 PM
>> Subject: [ICOM] ??Screws??
>>
>> Am looking for the short screws that work in the  IC-781,  R-9000, and
>> IC-7800.
>> Need about two dozen of them. (not the ones that work for rack handles)
>> Does anyone know what the thread size is and length of these screws?
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html


-- 
Gary Fiber K8IZ
GROL PG-19-6691 with shipboard radar endorsement
Washington State resident