[ICOM] Icom EX-1 Extension Terminal, plus other Icom items FS

Stephen Wilson xe1ufo at gmail.com
Thu Jan 28 21:29:07 EST 2010


Dear Ken,

Do you still have the EX-1 for sale? Will it work with my Icom IC-751A?

Thanks in advance!

Steve, XE1UFO

On Sun, Oct 11, 2009 at 11:18 AM, Ken Simpson, W8EK <W8EK at speakeasy.net>wrote:

> For Sale:
>
> Icom EX-1 "Extension terminal"
> This item is used with many of the older Icom rigs,
> specifically the ones that use the 24 pin molex socket
> (4 rows of 6 pins) for accessory items.  The EX-1
> permits two accessory items using the 24 pin connector
> to be used.  It also has a row of RCA phone jacks that
> can be connected for various functions.
> This particular unit is still in its box.  It even
> includes a brand new 24 pin plug, complete with all of
> the pins and the shielded hood, plus a couple cables
> with RCA plugs on them.  $25
>
>
> Icom IC-230 Two Meter FM Transceiver
>
> This was one of the first synthesized 2 meter FM rigs made.
>  From Icom, it covered the 146 and 147 MHz segments, which
> were the only FM band segments at the time.  It has about
> 10 watts output, as it came from Icom.
>
> Since it was one of the first, it is also a rig that has
> many modifications for it.  This one has a high-low power
> switch added, with a pot to adjust the low power.
>
> This particular unit is not working at the present time. It
> appears to have had a switch added that might be to give it
> the 145 MHz band segment, or it could be for something else.
>
> Radio only, with no accessories. $8
>
>
> 7 pin DIN Cable:
>
> This cable has a 7 pin DIN plug on each end, and is
> about 18 inches long. I think it is used for Icom HF
> transceivers to connect the HF rig to one of the
> automatic antenna tuners, such as the AT-150. It
> could have other uses. $18
>
>
> Antenna adapter to fit the BNC connector on an HT and
> provide an SO-239 connector that will permit a PL-259 to
> be attached. This can be used with any HT that has a BNC
> connector. $5
>
>
> Selectone ST-131 Subaudible PL tone encoder
> If you need subaudible tones, this unit will add them
> to the Icom IC-2AT, 3AT, 4AT, and others of that series
> that lacked the tones originally.  It is a postage stamp
> size unit.  This one has never been used, and is still
> in its original plastic bag, with the instructions. $30
>
>
> ORIGINAL Icom operating manuals:
>
> Please note that all of these are original Icom
> manuals and are not copies.
> All are in very good condition.
> These are original manuals only.
>
>        BC-30 Desk Charger $5
>        BC-35 Desk Charger $7
>        BP-2, BP-3, BP-4, BP-5 battery packs  $3
>        BP-21, BP-22, BP-23, and BP-24 Batteries $3
>        DC-1 DC pack for IC-2 AT series HTs $4
>        HM-8 Hand Microphone, w/schematic  $5
>        IC-2 AT, 2 meter HT  $10
>        IC-22 S, 2 m FM transceiver $12
>        IC-229, 2 meter mobile transceiver $15
>        IC-3 PA Power supply / speaker $10
>        UT-16 Voice Synthesizer $5
>
> These are original manuals only.
>
>
> Prices do not include shipping from Florida.
>
> Thanks.
>
> 73,
>
> Ken, W8EK
>
> Ken Simpson
> E-mail to W8EK at FLHam.net or W8EK at arrl.net
> Voice Phone  (352) 732-8400
>
>
>
>
>
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>


More information about the Icom mailing list