[ICOM] Internal Power Supplies

[Adam Farson]

Hi Rich,

This article may be helpful, at least as regards the PS-35:

http://www.qsl.net/icom/ps35adj.html

Cheers for now, 73,
Adam VA7OJ/AB4OJ
 

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Rich Arthur
Sent: 15-Jan-10 19:24
To: icom at mailman.qth.net
Cc: w6hi22 at hughes.net
Subject: [ICOM] Internal Power Supplies

I have a two PS-35's and one PS-25...not working

I cannot seem to find any servicing information on them...HELP...does one
just change out all the caps and hope for the best? Seems improper

The supplies are difficult to work on..jammed into Tuna cans (hi, hi) with
the PCB foil side down-under.

I talked with Scott (MTS) a while back and he directed me to a resistor
failure which did not prove a fix...he agreed they are a hassle to repair.

I know...just run an external supply...cheap-ready to go

HELP...If you have a working PS-25 for sale...let me know...
or any servicing help will be appreciated


Rich Arthur W6HI
w6hi22 at hughes.net