[ICOM] IC2KL RF Sens Board NEEDED

[CLIFF WALLACE]

OK-----Thanks again.  Cliff

--- On Wed, 1/6/10, Adam Farson <farson at shaw.ca> wrote:

> From: Adam Farson <farson at shaw.ca>
> Subject: Re: [ICOM] IC2KL RF Sens Board NEEDED
> To: "'ICOM Reflector'" <icom at mailman.qth.net>
> Date: Wednesday, January 6, 2010, 8:45 PM
> Hi Cliff,
> 
> Is it the board specified on the block diagram as VSWR DET?
> Icom no longer
> carries spare parts for the IC-2KL, ad I doubt that they
> support it any
> longer. 
> 
> Kuni at Comtek may be able to repair the 2KL.
> 
> http://www.w7jv.com/
> 
> Cheers for now, 73,
> Adam VA7OJ/AB4OJ
> 
> -----Original Message-----
> From: icom-bounces at mailman.qth.net
> [mailto:icom-bounces at mailman.qth.net]
> On
> Behalf Of CLIFF WALLACE
> Sent: 6-Jan-10 20:35
> To: ICOM Reflector
> Subject: Re: [ICOM] IC2KL RF Sens Board NEEDED
> 
> HI Adam,
>         Thanks for the reply.  The
> unit has been at HRO for a year now and
> they said ICOM is totally unresponsive.  The tech said
> it was the RF sensing
> board in the RF unit.  Allows the unit to power-up,
> then shuts it down after
> 30 seconds and keeps cycling on & off, making it
> useless.  Essentially I
> have not seen it or have a "first-hand" idea of what we are
> dealing with.
> Any help or suggestions are appreciated.
> 
> Thanks,
>        Cliff
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>