[ICOM] IC2KL RF Sens Board NEEDED

[CLIFF WALLACE]

HI Adam,
        Thanks for the reply.  The unit has been at HRO for a year now and they said ICOM is totally unresponsive.  The tech said it was the RF sensing board in the RF unit.  Allows the unit to power-up, then shuts it down after 30 seconds and keeps cycling on & off, making it useless.  Essentially I have not seen it or have a "first-hand" idea of what we are dealing with.  Any help or suggestions are appreciated.

Thanks,
       Cliff

--- On Wed, 1/6/10, Adam Farson <farson at shaw.ca> wrote:

> From: Adam Farson <farson at shaw.ca>
> Subject: Re: [ICOM] IC2KL RF Sens Board NEEDED
> To: "'ICOM Reflector'" <icom at mailman.qth.net>
> Date: Wednesday, January 6, 2010, 8:25 PM
> Hi Cliff,
> 
> Do you mean the reflectometer (Detector) at the output? If
> the PCB material
> is not scorched or charred, the board may be repairable.
> 
> Cheers for now, 73,
> Adam VA7OJ/AB4OJ
> 
> 
> -----Original Message-----
> From: icom-bounces at mailman.qth.net
> [mailto:icom-bounces at mailman.qth.net]
> On
> Behalf Of CLIFF WALLACE
> Sent: 6-Jan-10 20:21
> To: icom at mailman.qth.net
> Subject: [ICOM] IC2KL RF Sens Board NEEDED
> 
> Greetings Listers,  Have a dead IC2KL due to a fried
> RF Sensing board.
> Anyone parting out an amp, or have a good suggestion. 
> It would be greatly
> appreciated.  Please reply off-list.
> 
> TNX ES 73,
>           Cliff
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>