[ICOM] AFSK RTTY with PROIII

[Phil Krichbaum]

Joe,
    THANK YOU VERY MUCH! This is what I was looking for. It is in the 
book, I just overlooked it! I've never noticed the LSB-D or USB-D 
selections before. I can crank the filter down to 250 Hz which should do 
what I was looking for. I assume this is intended for using LSB or USB 
in Data.
    Phil N0KE

k0bx at arrl.net wrote:
> To use the filter in AFSK  use  LSB-D. The center frequency is 1500HZ.
> Set MMTTY to 1487 Mark Frequency or what ever the closes to 1500HZ.
> You BPF will now be able to go down to 100 HZ if you want, although 250 HZ would be the lowest.
>
> You cannot use the TWIN Peak filter in LSB-D only FSK.
>
> Joe K0BX
>
> Stop the insanity!
>
> Please do not add me to any distribution lists (Joke, Stories or Junk) without my permission.
>
> --- On Wed, 1/6/10, Phil Krichbaum <vailphil at sopris.net> wrote:
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>