[ICOM] wanted source of 6 pin molex plug re power cable

[Sam Harner]

Bad URL

-----Original Message-----
From: icom-bounces at mailman.qth.net
[mailto:icom-bounces at mailman.qth.net]On Behalf Of Larry Young
Sent: Tuesday, January 05, 2010 5:39 PM
To: ICOM Reflector
Subject: Re: [ICOM] wanted source of 6 pin molex plug re power cable


You can also find them at: www.buckscomm.com/  at the left side slect power
cords, connectors.


--- On Tue, 1/5/10, K5JN <k5jn at sbcglobal.net> wrote:

From: K5JN <k5jn at sbcglobal.net>
Subject: Re: [ICOM] wanted source of 6 pin molex plug re power cable
To: "ICOM Reflector" <icom at mailman.qth.net>
Date: Tuesday, January 5, 2010, 5:06 PM

You can find them at places like Mouser Electronics but I prefer to call
Icom, get the p/n's and order from Icom.   Some of the aftermarket connector
pins cause problems making a good connection.  They are very reasonable cost
at Icom.
73 Ralph K5JN




________________________________
From: Fern <crc at cyberlink.bc.ca>
To: ICOM Reflector <icom at mailman.qth.net>
Sent: Tue, January 5, 2010 3:57:12 PM
Subject: [ICOM] wanted source of 6 pin molex plug re power cable

Looking for a source of the molex 6 pin female plugs to make power cables
for the Icom hf rigs such as the IC-706, Ic-745 etc.  Thanks from Fern
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html