[ICOM] Battery Tray, DC Cord and other items FS

[Ken Simpson, W8EK]

Icom items For Sale:

Icom BP-20 Battery Case
The BP-20 is an "empty" battery pack designed to hold
regular AA cells. Of course a person can use regular
alkaline batteries, or NiCads, or NiMh batteries. This
pack will work with the Icom u2AT, u3AT, u4AT, and maybe
others. It is ideal if you have one of these HTs that
now has a dead battery.
This particular BP-20 is in its original box, and appears
to be new and never used. The box is labeled CM-20, which
is the same as the BP-20, except the commercial version.
$20

Power Cable for most of the Icom HF rigs
This cable has the 6 pin molex plug on it as is used by most
of the Icom HF rigs, plus many Kenwood, Yaesu, and others.
It includes a fuse in each lead and heavy cable.  $22


B & W Coaxial Antenna Switch:

B & W Model 550 A coax switch
This model will switch up to 5 antennas, and does NOT
ground unused antennas. It has the coax coming out the
sides like spokes of a wheel. This one has the optional
face place also.  It will handle full legal power and
has SO-239 connectors.
This one works fine and looks fine as well. $40


HF Antenna Balun:

A balun is used to match a balanced antenna (such as a beam or
dipole) to an unbalanced feedline (such as coax).

HyGain BN-86 Balun
The case of the BN-86 is constructed so that one can use it to
hang a dipole or inverted V, or a U-bolt can be added to attach
it to the boom of an HF beam antenna.
This particular balun works fine, but does show slight physical use.
It includes the paper work for $40.


Antenna adapter to fit the BNC connector on an HT and
provide an SO-239 connector that will permit a PL-259 to
be attached. This can be used with any HT that has a BNC
connector. $5


Other coax connectors and adapters:

Coax connectors and adapters For Sale:
Prices are per connector. Several of each are available.
These are NOS (have not been used).

BNC male
standard type $2
crimp on type $3

Chassis mount BNC female square mount (uses 4 screws), $3
screw in type, $4

BNC 90 degree, female to male $3

BNC "T" - two female and one male $4

Antenna adapter to fit the BNC connector on the HT
and provide an SO-239 connector that will permit
a PL-259 to be attached. (BNC male to UHF female) $5

UHF Male (PL-259) to BNC female (opposite of above) $5

UHF double female "Barrel connector" (two SO-239 together) $3

Chassis Mount SO-239 connectors (square) $1

UHF "T" connector with two female (SO-239) and one male
(PL-259) connection $5

Antenna adapter for Kenwood TH-21/31/41 HTs
Adapts the antenna connector found on these HTs to a
standard PL-259 connector. $6


Selectone ST-131 Subaudible PL tone encoder
If you need subaudible tones, this unit will add them
to the Icom IC-2AT, 3AT, 4AT, and others of that series
that lacked the tones originally.  It is a postage stamp
size unit.  This one has never been used, and is still
in its original plastic bag, with the instructions. $30


ORIGINAL Icom operating manuals:

Please note that all of these are original Icom
manuals and are not copies.
All are in very good condition.
These are original manuals only.

      BC-30 Desk Charger $5
      BC-35 Desk Charger $7
      BP-2, BP-3, BP-4, BP-5 battery packs  $3
      BP-21, BP-22, BP-23, and BP-24 Batteries $3
      DC-1 DC pack for IC-2 AT series HTs $4
      HM-8 Hand Microphone, w/schematic  $5
      IC-22 S, 2 m FM transceiver $12
      IC-229, 2 meter mobile transceiver $15
      IC-3 PA Power supply / speaker $10
      UT-16 Voice Synthesizer $5

These are original manuals only.


Rubber Duck antennas for your HT.

All are for 2 meters, are in good condition,
and are $10 each, unless stated otherwise.

5/16 inch threaded, like used by Motorola and others
Stubby, 4 inches long

Type F connector, 6.5 inches long

PL-259 connector, 6.5 inches long
HyGain 275, still in original packaging

PL-259 connector - Stubby, 4.6 inches long
Centurion, still in original package

Special for Kenwood TH-21 HT threaded connector
Kenwood RA-6 regular, 6.6 inches long, $15

Alinco Stubby w/BNC Connector, 4.6 inches long
Regular length BNC, 6.6 inches long

BNC Stubby for 440 MHz, 3 inches long


Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone  (352) 732-8400