[ICOM] Icom multimode multiband rigs, PS, manuals FS

[Ken Simpson, W8EK]

Icom items For Sale:


Icom IC-746 Pro, 160 thru 2 meter Multi mode transceiver:

The Icom IC-746 Pro covers 160-10 meters plus 6 and 2 meters
all mode. 100 Watts of output is available on all bands - HF,
50 MHz and 144 MHz, making the IC-746 Pro a practical choice
for all-around base station use. The die-cast aluminum chassis
and a large cooling fan help to stabilize the PA circuit,
providing 100% full duty cycle operation. The new Pro version
features 32 bit floating point DSP and 24-bit AD/DA converter.
There are NO more expensive optional filters to buy. The
digital IF filter allows one to select 51 filter bandwidths.
There are three user selectable filter memories per mode.
Soft and sharp filter shapes can be selected in both SSB and
CW modes independently. You can also change the settings on
the fly and compare! For repeater operation theres is a
built-in tone encoder and decoder with 50 CTCSS and 108
DTCS based tones. There is even a built-in Baudot RTTY
demodulator.

It has 100 alphanumeric memories, digital RF speech
compression, spectrum display, Manual and Automatic Notch,
digital Twin PBT, Noise Blanker, CTCSS encode/decode, APF,
two stage preamp, automatic antenna tuner and electronic
keyer. A built-in automatic antenna tuner operates on the
HF bands plus 6 meters. The 746 Pro requires 12 VDC at 23
amps. It is 11.3 x 4.8 x 12.5 inches in size and weighs
20 Lbs. See the May 2002 issue of QST for a review of
this radio.

Features
* Spectrum Scope
* 102 Memories
* RIT/XIT
* Digital Noise Reduction
* Manual and Automatic Notch
* Digital Twin PBT
* Dual Display
* 100 Watt Output
* 40 Watt Output (AM)
* Digital RF Speech Compressor
* Microphone Equalizer
* Monitor Transmit Audio
* SWR Plotting
* Built-in Automatic Antenna Tuner 180-6 Meters
* Full Break-In CW
* SSB/CW Synchronous Tuning
* 100% Duty Cycle
* Rx Antenna Jack
* 32 bit DSP
* 1 Hz Readout
* 4 Channel Memory Keyer
* RF Attenuator 6/12/18 dB
* RTTY Demodulator
* CW Pitch and CW Reverse
* Adjustable Transmit Bandwith
* Triple Band Stack Registers

This one works 100% as best I can tell, and looks close to
the same. I can not find a scratch on it. With paper work
for $1050.


Icom IC-706 Mk II G 160 meter thru 450 MHz transceiver:

The '706' Series represents one of the most popular transceivers
in amateur radio history. The latest version is the incredibly
small Icom IC-706 Mark II G which adds many new features and
capabilities not found in previous versions. The "G" is an
all-mode transceiver that provides 100 watts on HF and 6 meters
and 50 watts on 2 meters plus 20 watts on 440 MHz. It receives
from 30 kHz to 199 MHz and from 400 to 470 MHz. It features a
removable, remoteable, front panel that allows control of all
features. The large LCD display features alphanumeric memory
names (9 character) and soft key descriptions. The LCD even
supports a simple band scope display. Other advanced features
include: IF Shift, RIT, Tone Squelch, Scanning, Noise Blanker,
Speech Compressor, Mini Spectrum Scope and Electronic Keyer.
This latest version in the 706 series includes the UT-106 DSP
module as a standard feature. Despite its compact size (6.56"
x 2.28" x 7.88"), it has big, easy to use control dials. With
HM-103 hand mic. One or two optional filters may be added.

Features
* .03-199, 400-470 MHz Receive
* Alpha memories
* RIT
* Preamp/ATT
* VFO A/B
* 1 Hz Display
* IF Shift
* Scanning
* S/RF Meter
* 100 Watts HF+6M
* 50 Watts 2M, 20 Watts 440
* 100 Memories
* All band Multimode
* Removable head
* Mini Spectrum Scope
* Electronic Keyer

This one works 100% as best I can determine. It looks extremely
nice. Microphone and paper work are included for $650.


Icom PS-125 Switching 25 amp power supply
The ICOM PS-125 switching power supply provides 13.8 VDC,
at 25 amps. The output cord has the Molex plug prewired for
many Icom radios such as the IC-746Pro (above), or any of
the rigs (including Kenwood and Yaesu) that require the
heavy duty 6 pin molex connector. It is 4.4 x 3.7 x 11.3
inches in size and weighs under 7 pounds. With paper
work for $135


Astron RS-12 A, 13.8 Volt DC Power Supply:

This power supply is rated at 9 amps continuous and 12 amps
ICS. It is ideal for most 2 meter rigs, including the 50 Watt
rigs.

This Astron power supply features solid-state electronic
regulation, EMI filter, fold back current limiting for
protection from excessive current and shorted output, and
crowbar over-voltage protection.

This particular supply works 100% and looks the same. I can
not find a scratch on it. With paper work for $50.


Hand Microphones:

Generic Low Impedance Hand Microphone
This is a low impedance hand microphone, black in color.
Looks and works great. With 4 pin connector. $25


DTMF Touch Tone Microphone:

Icom HM-8 hand mic with Touch Tone (DTMF) Pad:
The HM-8 has a 12 digit touch tone (DTMF) pad on the front
of it, along with an on-off switch for the tones. Of course
it also has the normal PTT switch.
The HM-8 is used on the 25A Red LED, 245, 290, 402, 202S,
451, 471A, plus other rigs.
This particular microphone has an 8 pin round connector,
works fine, and includes paper work for $40.


ORIGINAL Icom operating manuals:

Please note that all of these are original Icom manuals
and are not copies. All are in very good condition.
These are original manuals only.

BC-30 Desk Charger $5
BC-35 Desk Charger $7
BP-2, BP-3, BP-4, BP-5 battery packs $3
BP-21, BP-22, BP-23, and BP-24 Batteries $3
DC-1 DC pack for IC-2 AT series HTs $4
HM-8 Hand Microphone, w/schematic $5
IC-22 S, 2 m FM transceiver $12
IC-3 PA Power supply / speaker $10
UT-16 Voice Synthesizer $5

These are original manuals only.


I also have many other accessories available such as
microphones, wattmeters, keyers, etc. Just too many to
list here. Many things other than Icom also!
Please e-mail your requests.


Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400