[ICOM] IC-706, IC-255, Mics and manuals FS

[Ken Simpson, W8EK]

Icom items For Sale:


Icom IC-706 Mk II G 160 meter thru 450 MHz transceiver:

The '706' Series represents one of the most popular transceivers
in amateur radio history. The latest version is the incredibly
small Icom IC-706 Mark II G which adds many new features and
capabilities not found in previous versions. The "G" is an
all-mode transceiver that provides 100 watts on HF and 6 meters
and 50 watts on 2 meters plus 20 watts on 440 MHz. It receives
from 30 kHz to 199 MHz and from 400 to 470 MHz. It features a
removable, remoteable, front panel that allows control of all
features. The large LCD display features alphanumeric memory
names (9 character) and soft key descriptions. The LCD even
supports a simple band scope display. Other advanced features
include: IF Shift, RIT, Tone Squelch, Scanning, Noise Blanker,
Speech Compressor, Mini Spectrum Scope and Electronic Keyer.
This latest version in the 706 series includes the UT-106 DSP
module as a standard feature. Despite its compact size (6.56"
x 2.28" x 7.88"), it has big, easy to use control dials. With
HM-103 hand mic. One or two optional filters may be added.

Features
* .03-199, 400-470 MHz Receive
* Alpha memories
* RIT
* Preamp/ATT
* VFO A/B
* 1 Hz Display
* IF Shift
* Scanning
* S/RF Meter
* 100 Watts HF+6M
* 50 Watts 2M, 20 Watts 440
* 100 Memories
* All band Multimode
* Removable head
* Mini Spectrum Scope
* Electronic Keyer

This one works 100% as best I can determine. It looks extremely
nice. Microphone and paper work are included for $650.


Icom IC-255 A, Two meter FM Transceiver:

The Icom IC-255 A, is a 2 meter FM rig that has memories,
scan features, and dual VFOs, amount other features.

This one has a problem, however.  Its output power is only
a fraction of a watt.  The receiver works OK, the memories
and scan functions all work fine, all parts of the front
panel light properly, but the power output is low.  This
would indicate that the final module needs to be replaced.

Basically, this unit has been used as a receiver (or scanner,
if you prefer).  As a result, the microphone has been lost.

Cosmetically, it looks very nice.  Not perfect, but extremely
nice.

With paper work for $30.


Hand Microphones:

Astatic D-104-M6 Hand Microphone

Most of use know what the D-104 "Lollypop" desk mic is like.
This is the hand mic equivalent.

The D104-M6 microphone is a quality performance field effect
amplified “power” microphone. The housing is molded black ABS;
the front half is chrome plated and the grille screen is chrome
plated. The output impedance is compatible with the inputs of
almost all commercial transceivers; it has an externally adjustable
high gain amplifier to ensure the desired modulation level.
The D104-M6 has an easily accessible control so that the correct
modulation level can be set for each operators voice.

This one works fine and looks extremely nice.

With paper work for $40.


Generic Low Impedance Hand Microphone
This is a low impedance hand microphone, black in color.
Looks and works great. With 4 pin connector. $25


DTMF Touch Tone Microphone:
Icom HM-8 hand mic with Touch Tone (DTMF) Pad:
The HM-8 has a 12 digit touch tone (DTMF) pad on the front
of it, along with an on-off switch for the tones. Of course
it also has the normal PTT switch.
The HM-8 is used on the 25A Red LED, 245, 290, 402, 202S,
451, 471A, plus other rigs.
This particular microphone has an 8 pin round connector,
works fine, and includes paper work for $40.


Icom HM-70 Speaker Microphone:
The Icom HM-70 speaker mic (also known as the EX-1036)
works on the Icom 2SRA, 4SRA, Delta 1, IC-W2/X2 or any
Icom HT which uses the single 3 conductor stereo-style
1/8 inch (3.5 mm) plug.
This one is in the original box, and appears to be unused.
$25


ORIGINAL Icom operating manuals:

Please note that all of these are original Icom manuals
and are not copies. All are in very good condition.
These are original manuals only.

BC-30 Desk Charger $5
BC-35 Desk Charger $7
BP-2, BP-3, BP-4, BP-5 battery packs $3
BP-21, BP-22, BP-23, and BP-24 Batteries $3
DC-1 DC pack for IC-2 AT series HTs $4
HM-8 Hand Microphone, w/schematic $5
IC-22 S, 2 m FM transceiver $12
IC-3 PA Power supply / speaker $10
UT-16 Voice Synthesizer $5

These are original manuals only.


Astron RS-12 A, 13.8 Volt DC Power Supply

This power supply is rated at 9 amps continuous and 12 amps ICS.
It is ideal for most 2 meter rigs, including the 50 Watt rigs.

This Astron power supply features solid-state electronic
regulation, EMI filter, fold back current limiting for protection
from excessive current and shorted output, and crowbar over-voltage
protection.

This particular supply works 100% and looks the same. I can not find
a scratch on it. With paper work for $50.


I also have many other accessories available such as
microphones, wattmeters, keyers, etc. Just too many to list
here. Please e-mail your requests.


Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400











__________ Information from ESET NOD32 Antivirus, version of virus signature database 5686 (20101208) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com