[ICOM] IC761 problem

[Robert Brucker]

Does your frequency display read  dashes  and/or the S meter read half scale? Robert W6LFO

On Aug 12, 2010, at 10:35 PM, zl3kr wrote:

> Many thanks for the replies... now I do have a workshop Manual for the IC761
> and I have previously replaced the trimmers with ceramic ones.
> My first thought was that I had disturbed something when moving the 
> power supply
> in and out while repairing, but I cannot see any plugs or wires disturbed.
> It seems strange that the trimmers  might go out of tune when they were 
> working perfectly
> before the power supply problem.
> It is the same on all bands that I have tried as well, so not limited to 
> just the one frequency range
> which I guess makes the problem more difficult rather than less  lol.
> But it does sound like a PLL problem, however I wasnt sure if the PLL 
> oscillators were involved in
> running the digital read out as well, as that seems to be working perfectly.
> 
> Alan ZL3KR
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html