[ICOM] Icom 765 Low output on 80 and 160 meters receive on these bands is fine.

[Adam Farson]

Hi Jeff,

There may be a defective component in the BPF group on the RF board. You can
check the RF power output at J8 (RF Unit) with an RF millivoltmeter. The
signal level at J8 should be approx. +20 dBm on all bands.

Cheers for now, 73,
Adam VA7OJ/AB4OJ
 

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Jeff
Sent: 19-Apr-10 07:21
To: icom at mailman.qth.net
Subject: [ICOM] Icom 765 Low output on 80 and 160 meters receive on these
bands is fine.

  Good Day,
My Icom 765 I am getting low output on 80 and 160, about 60 watts into a
dummy load. I bypassed the LPF board and still get low output. Could someone
point me as what to check on the rf board. Any help is appreciated.

Best Regards Jeff kd4lyh