[ICOM] internal battery HT

[Gary Fiber]

Actually Icom had Nothing to do with the HTX-202. It was made for Radio 
Shack by Maxon.
  Radio Shack told Maxon to choose some common accessory and they picked 
on Icom's design. There was no licensing by Icom for anything with that 
hand held.
There were a lot of them sold though by Radio shack and they seem to be 
a good product.
Seems to me there is a forum on Yahoo about the HTX series products 
should you run into a stumbling block where to get the replacement battery..
Its likely a solder in type with spot welded solder tabs on it.

Gary K8IZ


On 4/7/2010 2:55 PM, arttravels wrote:
> I need to replace the internal button battery in one of my HT's
>
> The HT is a Realistic model HTX202 sold by Radio Shack, same model as
> the ICOM of the early 90's.
>
> Any help on the voltage and number of the battery or replacement will be
> appreciated.
>
> Art WB9JKZ
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>    

-- 
Gary Fiber K8IZ
General Radiotelephone Operator License PG-19-6691 with shipboard radar endorsement
Washington State Resident