[ICOM] CQ

[Matousek Karel]

Hi Adam,

there is manufacturing blunder on TS940S.

In September 2004 PY1NR announced he had discovered:

-on RF board Preamp Q10 and
-on the IF board 2nd balanced mixer Q4,
had been drawn on the circuit boards and mounted in the reverse orientation to that shown in the Kenwood Circuit Diagram.
   
See PY1NR web site www.guisard.com 
and
http://www.eham.net/articles/926

So did I the mods on 6 pieces of TS940 tooo.

Karel OK1CF

>---------------------------------------------------------
>Od: Adam Farson
>Přijato: 29.9.2009 5:55:58
>Předmět: Re: [ICOM] CQ
>
>Hi John,
>
>
>
>I used to watch my neighbour's TS-940S on my spectrum analyser every Sunday
>
>morning, when he ran a net. It had awful synthesiser phase noise. I
>
>understand that there are some fixes for those issues, though.
>
>
>
>Cheers for now, 73,
>
>Adam VA7OJ/AB4OJ
>
>
>
>
>
>-----Original Message-----
>
>From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
>
>Behalf Of John Geiger
>
>Sent: 28-Sep-09 19:28
>
>To: ICOM Reflector
>
>Subject: Re: [ICOM] CQ
>
>
>
>I have heard some very good things about the TS940SAT but of course the
>
>756PRO series blows it away because they do 6 meters!
>
>
>
>73s John AA5JG
>
>
>
>----
>
>Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>
>Icom FAQ: http://www.qsl.net/icom/
>
>To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>
>
>