[ICOM] computer program for Icom IC-706MKIIG

[Dave AA6YQ]

Commander supports your IC-706MKIIG, and WinWarbler (DXLab's digital mode
application) provides both spectrum and waterfall displays. Both are members
of the free-ware DXLab Suite, eight applications that can be run
individually, but when run simultaneously will automatically
interoperate.Besides the usual transceiver control functions, Commander

- controls up to 4 transceivers, with optional transceiver selection by
frequency

- provides 10 banks of 10 memories, with the ability to continuously scan a
bank's frequencies

- displays frequency-dependent settings for devices like tuners, amplifiers,
and antenna switches, with optional control via parallel port signals

- supports transverters for 6m, 4m, 2m, and 70cm operation

- provides user-defined transceiver control sequences initiated by buttons
(up to 16) and sliders (up to 8)

- is updated frequently, and downloads/installs upgrades with a single mouse
click; reported defects are generally corrected within 24 hours, so the
backlog of reported but uncorrected defects across the entire DXLab Suite is
usually zero.

- is driven by an active and friendly user community open to everyone

- besides Commander and WinWarbler, other members of the DXLab Suite include
DXKeeper (logging), DXView (callsign lookup and geographic display),
PropView (propagation prediction), SpotCollector (DX spot collection and
analysis), and Pathfinder (QSL route discovery)

DXLab is available via

<http://www.dxlabsuite.com/download.htm>

   73,

        Dave, AA6YQ



-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]On
Behalf Of Walt - WB2VSJ
Sent: Thursday, September 03, 2009 8:09 PM
To: 'ICOM Reflector'
Subject: Re: [ICOM] computer program for Icom IC-706MKIIG


Renee,

Try Ham Radio Deluxe, it's free.  http://www.ham-radio-deluxe.com/

The Digital Master 780 program is for working the Digital modes, but will
let you "see" a small portion of the band you are on.

Good Luck

Walt - WB2VSJ

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Renee
Sent: Thursday, September 03, 2009 7:55 PM
To: Icom
Subject: [ICOM] computer program for Icom IC-706MKIIG

Hello all,
Are there any computer programs for the Icom
IC-706MKIIG? Something that helps control it
and also has a spectrum analyzer  too? Any
info will be greatly appreciated!
73,
Renee NZ9T
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.13.74/2339 - Release Date: 09/03/09
05:50:00