[ICOM] IC 751 problem

[shaun Palmer]

Hi Gary

Thanks for the information on how to fix the IC 751

Regard

Shaun Palmer VK6FSAP

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Gary Nichols
Sent: Thursday, 3 September 2009 6:50 AM
To: 'ICOM Reflector'
Subject: Re: [ICOM] IC 751 problem

Sounds like the VCO trimmer caps need replaced...the original plastic caps
were notorious for causing that issue. 

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of shaun Palmer
Sent: Wednesday, September 02, 2009 6:31 PM
To: icom at mailman.qth.net
Subject: [ICOM] IC 751 problem

Hi

 

My IC 751 is distorted on RX and when I TX on 80m and 40m. 40m is worse than
80m.   I there is no distortion on 20m.  I need some help where to find the
problem.

 

Regard

 

Shaun Palmer  VK6FSAP

 

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html