[ICOM] IC 751 problem

[shaun Palmer]

Hi Gary

Thanks for the information on how to fix my IC 751

Regard 

Shaun Palmer

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Gary P. Fiber
Sent: Thursday, 3 September 2009 6:48 AM
To: ICOM Reflector
Subject: Re: [ICOM] IC 751 problem

Shaun,

Most likely the VCO trimmer caps are in trouble. Grab all 4 of them. 
They use a voltage point for alignment. No counters or scopes required.
Its not to bad of a job to do.

Gary K8IZ

shaun Palmer wrote:
> Hi
>
>  
>
> My IC 751 is distorted on RX and when I TX on 80m and 40m. 40m is worse
than
> 80m.   I there is no distortion on 20m.  I need some help where to find
the
> problem.
>
>  
>
> Regard
>
>  
>
> Shaun Palmer  VK6FSAP
>
>  
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>   

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html