[ICOM] New Icom IC-706MKIIg with Older SGC SG-231?
KD7JYK DM09
kd7jyk at earthlink.net
Thu Oct 22 17:30:11 EDT 2009
I have the connection info in my SG-231 manual, BUT, the MKIIg didn't exist
at the time and SGC says that Icom changed the control info between the MKII
and MKIIg, so I need info with actualy hands on experience. SGC said they
did not know and they've discontinued the '231. They suggested I "try it".
Kurt
----- Original Message -----
From: "Tom Norris" <nu4g.radio at gmail.com>
To: "KD7JYK DM09" <kd7jyk at earthlink.net>
Sent: Wednesday, October 21, 2009 23:00
Subject: Re: [ICOM] New Icom IC-706MKIIg with Older SGC SG-231?
: Used one for several years, worked fine. There is a circuit on SGC's
: web site, I think, that shows the best way to connect to the tuner or
: accy socket of most radios to get better results -- since it's always
: better to tune with very low power, then switch to high power when
: it's tuned.
:
: If you haven't gotten any replies or can't find the info, I probably
: have it around here somewhere, just email me.
:
: Tom NU4G
:
:
: On 10/20/09, at 1:32 PM, KD7JYK DM09 wrote:
:
: > Is anyone using a newer IC-706MKIIg with the older SGC-231 Smartuner
: > with
: > the units connected through the assessory connector, NOT, in RF
: > sense mode?
: >
: > Any problems in these two pieces of equipment working together?
: >
: > Kurt
: >
: > ----
: > Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
: > Icom Users Net: Sundays, 1700Z, 14.316 MHz
: > Icom FAQ: http://www.qsl.net/icom/
: > To support QSL/QTH.net: http://www.qsl.net/donate.html
:
More information about the Icom
mailing list