[ICOM] 761/765 buttons

[Alan Leith]

Forgive my ignorance, Larry.  How do I find the archives?

73

Al, VE1AL

 

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Larry Young
Sent: Tuesday, October 06, 2009 6:39 PM
To: ICOM Reflector
Subject: Re: [ICOM] 761/765 buttons

Alan: Check the archives, as I recall a writer providing ia procedure on
how to restore the printing on the buttons that had been worn off. It was
not too difficult to do.
Larry K4LXV

--- On Tue, 10/6/09, Alan Leith <aleith at syd.eastlink.ca> wrote:

From: Alan Leith <aleith at syd.eastlink.ca>
Subject: [ICOM] 761/765 buttons
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Date: Tuesday, October 6, 2009, 3:59 PM

I am in need of two buttons for my IC-761: the VFO UP and VFO DOWN buttons.
I have pretty much worn the decals off them.  I have checked with ICOM
Canada, ICOM USA and ICOM in England.  If they do have them they are
ridiculously expensive.  

Can any one help?  I have the following that I could trade: #s 1 2 3 6 7 8
9 0, VFO A/B, VFO MEMO, A=B, RTTY, SPLIT, ENT, blank (x2).

73

Al, VE1AL








----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To
support QSL/QTH.net: http://www.qsl.net/donate.html
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To
support QSL/QTH.net: http://www.qsl.net/donate.html