[ICOM] IC 765 Tuner Issue

[Dave K6DLW]

I recommend gaining access to the tuner and unjamming it manually.
Dave K6DLW

----- Original Message ----- 
From: "Nathan Moreschi" <n4ydu at yahoo.com>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Monday, November 09, 2009 6:09 PM
Subject: [ICOM] IC 765 Tuner Issue


>I believe a servo motor in my IC 765 is jammed. I read a procedure in which 
>a voltage of 15 volts can be applied to the motor to un-jam it. Does anyone 
>have experience with this?
>
> The procedure mentioned seemed to be lacking details. It said to remove 
> jumper J6 from the tuner board and apply 15 volts to the motor. Do I apply 
> it directly to the motor or are the leads to the motor on the jumper?
>
>
> Is there another alternative?
>
>
> 73,
>
> Nate/N4YDU
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html