[ICOM] PS-125

[Walt Heilsnis - WB2VSJ]

There is a diagram in the manual (last page) saying/showing the same as what Dan said, except that the orientation is flipped top to bottom.

Anyway, you got what you needed.  Good luck!

Walt - WB2VSJ

-----Original Message-----
>From: Mike <nf4l at nf4l.com>
>Sent: Nov 4, 2009 8:27 AM
>To: ICOM Reflector <icom at mailman.qth.net>
>Subject: Re: [ICOM] PS-125
>
>Walt Heilsnis - WB2VSJ wrote:
>> Try here:
>>
>> http://www.ab4oj.com/dl/ps125um.pdf
>>   
>Thanks, Walt.
>The schematic is too blurry for me, and it doesn't (I think) identify 
>the pins in the connector.
>
>Mike
>> Walt - WB2VSJ
>> -----Original Message-----
>>   
>>> From: Mike <nf4l at nf4l.com>
>>> Sent: Nov 4, 2009 8:04 AM
>>> To: ICOM Reflector <icom at mailman.qth.net>
>>> Subject: Re: [ICOM] PS-125
>>>
>>> Yep, Dan you got I mean. Do you know which pair are the switch?
>>>
>>> Mike
>>>
>>> Dan Cotsirilos wrote:
>>>     
>>>> I don't think that is what he means? The Icom supplies need 2 pins to short 
>>>> for the supply to work. The on off on the radio is for the both the supply 
>>>> and the radio
>>>>
>>>> When he plugs it into his Pro 2 the radio shorts these pins on turn on.
>>>>
>>>> To use this supply with other radios these 2 pins must be manually 
>>>> connected.
>>>>
>>>>
>>>> Dan K9DTC
>>>> ----- Original Message ----- 
>>>> From: "Walt Heilsnis - WB2VSJ" <wb2vsj at earthlink.net>
>>>> To: "ICOM Reflector" <icom at mailman.qth.net>
>>>> Sent: Wednesday, November 04, 2009 6:03 AM
>>>> Subject: Re: [ICOM] PS-125
>>>>
>>>>
>>>>   
>>>>       
>>>>> Mike,
>>>>>
>>>>> If you have shorted the + - temporarily, the unit will stop providing 
>>>>> power until
>>>>> the short is removed and you power cycle the PS-125.  I'm guessing you 
>>>>> stuck the meter
>>>>> probes into the plug and they shorted for a second while the unit was on?
>>>>>
>>>>>
>>>>> Walt - WB2VSJ
>>>>>
>>>>> -----Original Message-----
>>>>>     
>>>>>         
>>>>>> From: Mike <nf4l at nf4l.com>
>>>>>> Sent: Nov 4, 2009 6:28 AM
>>>>>> To: ICOM Reflector <icom at mailman.qth.net>
>>>>>> Subject: [ICOM] PS-125
>>>>>>
>>>>>> What's the secret for getting some power to ooze out of a PS-125? I'd
>>>>>> like to use one on some other gear, but when I try to read the plug, I
>>>>>> get nil. Works fine on the PRO II though.
>>>>>>
>>>>>> 73, Mike NF4L
>>>>>>
>>>>>> ----
>>>>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>>>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>>>>> Icom FAQ: http://www.qsl.net/icom/
>>>>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>>>>>       
>>>>>>           
>>>>> ----
>>>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>>>> Icom FAQ: http://www.qsl.net/icom/
>>>>> To support QSL/QTH.net: http://www.qsl.net/donate.html 
>>>>>     
>>>>>         
>>>> ----
>>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>>> Icom FAQ: http://www.qsl.net/icom/
>>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>>>
>>>>   
>>>>       
>>> ----
>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>> Icom FAQ: http://www.qsl.net/icom/
>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>>     
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>
>>   
>
>
>----
>Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/
>To support QSL/QTH.net: http://www.qsl.net/donate.html