[ICOM] PS-125

[Walt Heilsnis - WB2VSJ]

Try here:

http://www.ab4oj.com/dl/ps125um.pdf

Walt - WB2VSJ
-----Original Message-----
>From: Mike <nf4l at nf4l.com>
>Sent: Nov 4, 2009 8:04 AM
>To: ICOM Reflector <icom at mailman.qth.net>
>Subject: Re: [ICOM] PS-125
>
>Yep, Dan you got I mean. Do you know which pair are the switch?
>
>Mike
>
>Dan Cotsirilos wrote:
>> I don't think that is what he means? The Icom supplies need 2 pins to short 
>> for the supply to work. The on off on the radio is for the both the supply 
>> and the radio
>>
>> When he plugs it into his Pro 2 the radio shorts these pins on turn on.
>>
>> To use this supply with other radios these 2 pins must be manually 
>> connected.
>>
>>
>> Dan K9DTC
>> ----- Original Message ----- 
>> From: "Walt Heilsnis - WB2VSJ" <wb2vsj at earthlink.net>
>> To: "ICOM Reflector" <icom at mailman.qth.net>
>> Sent: Wednesday, November 04, 2009 6:03 AM
>> Subject: Re: [ICOM] PS-125
>>
>>
>>   
>>> Mike,
>>>
>>> If you have shorted the + - temporarily, the unit will stop providing 
>>> power until
>>> the short is removed and you power cycle the PS-125.  I'm guessing you 
>>> stuck the meter
>>> probes into the plug and they shorted for a second while the unit was on?
>>>
>>>
>>> Walt - WB2VSJ
>>>
>>> -----Original Message-----
>>>     
>>>> From: Mike <nf4l at nf4l.com>
>>>> Sent: Nov 4, 2009 6:28 AM
>>>> To: ICOM Reflector <icom at mailman.qth.net>
>>>> Subject: [ICOM] PS-125
>>>>
>>>> What's the secret for getting some power to ooze out of a PS-125? I'd
>>>> like to use one on some other gear, but when I try to read the plug, I
>>>> get nil. Works fine on the PRO II though.
>>>>
>>>> 73, Mike NF4L
>>>>
>>>> ----
>>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>>> Icom FAQ: http://www.qsl.net/icom/
>>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>>>       
>>> ----
>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>> Icom FAQ: http://www.qsl.net/icom/
>>> To support QSL/QTH.net: http://www.qsl.net/donate.html 
>>>     
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>
>>   
>
>
>----
>Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/
>To support QSL/QTH.net: http://www.qsl.net/donate.html