[ICOM] IC-745 CW Keying Problem

[Jim Gomez]

I have it connected to a 50 ohm dummy load and it doesn't key OK.
I have it in the bench and is not grounded, but I have another one that
under same conditions works OK. I have been checking all the components in
the keying circuit and they are OK, but I can see that the output of IC7/2
does not change when the vox delay is on, I do not understand how they are
related.
Thank you,

Jim, HK1N

On Mon, Mar 9, 2009 at 2:25 PM, <k4lxv at bellsouth.net> wrote:

>
> Does your IC-745 key OK when connected to a 50 Ohm Dummy load?
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH: http://www.qsl.net/donate.html
>



-- 
Jim, HK1N
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/icom/attachments/20090309/cfafa989/attachment.html