[ICOM] Removing FL-53A filter

[Bruce]

Matt,
You will have to remove the pcb it is mounted on..it is probably 
bolted down with
2 nuts on the solder side of the pcb. Worse case is it is soldered in 
to the pcb..
Don't force it since the pcb can't take to much abuse..
73's
Bruce
At 11:58 PM 7/1/2009, you wrote:
>I am trying to remove the FL-53A filter from my IC-751A to put in another
>rig. I thought it was a plug in filter?? It seems a little hesitant to come
>out. Do I need to take out  the circuit board and unfasten some nuts/solder
>or something? I can't remember how it went in, guess it was too long ago.
>Any help appreciated before I do unnecessary disassembly of the rig.
>
>
>
>Thanks,
>
>Matt-K7BG
>
>----
>Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/
>To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>No virus found in this incoming message.
>Checked by AVG - www.avg.com
>Version: 8.5.375 / Virus Database: 270.13.2/2213 - Release Date: 
>07/01/09 18:07:00