[ICOM] Pro III Twin Peak Filter Adjustable?

[k0bx at arrl.net]

I think you are wrong on the twin Peak filter.

You can go to the side menu, where it says turn twin peak on/off.

Press and Hold, you can change the filters from 1000 to 250.  

Joe K0BX 

Stop the insanity!
Please do not add me to any distribution lists (Joke, Stories or Junk) without my permission.


--- On Mon, 1/5/09, Adam Farson <farson at shaw.ca> wrote:

> From: Adam Farson <farson at shaw.ca>
> Subject: Re: [ICOM] Pro III Twin Peak Filter Adjustable?
> To: "'ICOM Reflector'" <icom at mailman.qth.net>
> Date: Monday, January 5, 2009, 10:55 AM
> Hi Alex,
> 
> You can adjust the bandwidth of the 350 Hz IF filter via
> the Filter menu.
> The Twin Peak Filter is a separate filter which is
> post-demodulation. It is
> fixed, and has peaks at the marking and spacing tone
> frequencies.
> 
> Cheers for now, 73,
> Adam VA7OJ/AB4OJ
> 
> 
> -----Original Message-----
> From: icom-bounces at mailman.qth.net
> [mailto:icom-bounces at mailman.qth.net] On
> Behalf Of Alex
> Sent: 5-Jan-09 06:43
> To: icom at mailman.qth.net
> Subject: [ICOM] Pro III Twin Peak Filter Adjustable?
> 
> Hi there,
> 
> I haven't gone through the manual completely yet, but I
> was wondering if it
> is possible to adjust the filter bandwidth of the twin peak
> filter from
> 350Hz to something like 250Hz?
> 
> Thanks and 73,
> --Alex KR1ST
> http://www.kr1st.com
> 
> ----
> Your Moderator: Dick Flanagan K7VC:
> icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/