[ICOM] 756Pro3 tuning knob problem

[Jim Spears]

Thanks, will go forward.  Did not want to pull something that was not meant
to be pulled, hi.

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of James
Sent: Saturday, January 03, 2009 10:04 PM
To: ICOM Reflector
Subject: Re: [ICOM] 756Pro3 tuning knob problem

Jim
It just pulls off, and pushes on, NO SETSCREWS!!


----- Original Message ----- 
From: "Jim Spears" <n1nk at cox.net>
To: <icom at mailman.qth.net>
Sent: Saturday, January 03, 2009 4:27 PM
Subject: [ICOM] 756Pro3 tuning knob problem


> Anyone know how to remove a Pro3 tuning knob?  It does not seem as easy as
> removing the rubber ring on the outside of the knob and loosening 
> setscrews.
> It seems that the knob has been pressed into the front panel leaving
> interference and 'stickiness' which is not affected by the knob friction
> adjustment.
>
>
>
> Jim
>
> N1NK
>
> N1NK at cox.net
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 


----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/