[ICOM] PW1 AMP/Protect Light

[The Romagni's]

1:1

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Bill Jourdain
Sent: Saturday, December 19, 2009 11:39 AM
To: 'ICOM Reflector'
Subject: Re: [ICOM] PW1 AMP/Protect Light

What is the SWR on the antenna you are using with the amp and transceiver?
Could be an antenna problem.

Bill
AB4BJ

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of The Romagni's
Sent: Saturday, December 19, 2009 11:31 AM
To: icom at mailman.qth.net
Subject: [ICOM] PW1 AMP/Protect Light

Good morning,

Today out of the blue (this unit has been working fine), when ever I turned
the amp on, and key the rig, the PW1 amp/protect light goes on
automatically. any suggestions, I tried a hard reset but still nada.

I sort of starting to think this might need a trip to the shop.

73

Steve
W4DTA
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html