[ICOM] IC-706MkIIG & N2VZ Turbo Tuner

[Michael G. Carper]

Yeah, I've still got my ATAS-100... I've been inclined to put it back on.

Yes, I'm running it remote (www.wa9pie.net/hamradio).  I tried a choke on
the tuner control cable and that didn't do anything.  I hadn't tried a choke
on the remote cable.  Overall, using chokes for most of this stuff probably
isn't a bad thing.  I'll try that and report back later.

Mike, WA9PIE

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Bill NY9H
Sent: Thursday, August 27, 2009 1:48 AM
To: ICOM Reflector
Subject: Re: [ICOM] IC-706MkIIG & N2VZ Turbo Tuner

sound like rf got into your remote cable .,,,,  you are running the 
set remote????

i have chokes on my control cables for the 706,,,,  and the antenna 
conterol & rf lines...

otherwise it sure beat the old atas I had.....

bill

At 11:13 PM 8/26/2009, you wrote:
>Has anyone seen this problem?
>
>
>
>My gear - IC-706MkIIG, N2VZ Turbo Tuner, Tarheel Model 100.
>
>
>
>I've been using this gear for a while.  However, recently. when I key up
>with the N2VZ Turbo Tuner plugged into the Tuner Control Socket, the rig
>toggles out of USB mode and into CW mode while I'm talking (obviously,
>disrupting the transmitted audio).
>
>
>
>If I simply unplug the cable from the Tuner Control Socket, everything
works
>fine.  It hasn't always been this way.
>
>
>
>Any ideas?
>
>
>
>Mike, WA9PIE
>
>----
>Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/
>To support QSL/QTH.net: http://www.qsl.net/donate.html

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html