[ICOM] IC271H memories reset

[Bob]

I found the procedure to patch in a battery, then cut loose the original 
one and install a new one.  That did not work, and left me without memory.

http://www.willcoele.com/radio_repair/

Jack put my 271H back in service for $50.00, plus shipping of course.  He 
has the gear to do this and the turnaround, as I recall was pretty quick.

Give him a look.  It beats tossing the old rig.

Bob


At 09:42 8/24/2009 -0500, you wrote:
>Thank you, Walt, in fact no ggod news but if there is nothing else to do,
>the owner of the radio will have to forget about it....
>
>73,
>
>Jim, HK1N
>
>On Mon, Aug 24, 2009 at 9:08 AM, Walt Heilsnis - WB2VSJ <
>wb2vsj at earthlink.net> wrote:
>
> > Not sure you are gonna like this answer:
> >
> > >From the ICOM Website:
> > "IC-271A/H - Reprogram the RAM card."
> >
> > http://www.icomcanada.com/techbulletin/tb1/cpureset.htm#amateur
> >
> >
> > Walt - WB2VSJ
> >
> > -----Original Message-----
> > >From: Jim Gomez <cwdx.hk1n at gmail.com>
> > >Sent: Aug 24, 2009 9:47 AM
> > >To: ICOM Reflector <Icom at mailman.qth.net>
> > >Subject: [ICOM] IC271H memories reset
> > >
> > >Does any one knows of a procedure to reset the micrdoprocessor (including
> > >the memories) in the 271H? I know that the RAM unit battery cannot be
> > >disconnected to do it.
> > >Thank you, appreciate any help,
> > >
> > >--
> > >Jim, HK1N
> > >
> > >
> > >
> > >--
> > >Jim, HK1N
> > >----
> > >Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> > >Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > >Icom FAQ: http://www.qsl.net/icom/
> > >To support QSL/QTH.net: http://www.qsl.net/donate.html
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > To support QSL/QTH.net: http://www.qsl.net/donate.html
> >
>
>
>
>--
>Jim, HK1N
>----
>Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/
>To support QSL/QTH.net: http://www.qsl.net/donate.html

  You can ignore reality, but you can't ignore the consequences of ignoring 
reality. Ayn Rand