[ICOM] 761 buttons

[Mac McCullough]

my apology,  nothing was intended for this reflector..  my sincere apology 
..  mac/mc


----- Original Message ----- 
From: "Mac McCullough" <w5mc at austin.rr.com>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Thursday, April 23, 2009 5:17 PM
Subject: Re: [ICOM] 761 buttons


> Dick  i ratted you out this afternoon..  i went into the Cafe about 2 pm
> and there sat our old pal Matt Mannis wife and another couple from Minn. 
> who
> was visiting them up in sun city ..  so as we talked,  i made mention i 
> was
> loosing you all's vote and to put the squuze on your ass ..  we had a good
> laugh covering some of the more torid times and experiences from the early
> days of incorporation ..  all in good humor .. Matt looks like he has lost
> about 15-25 pounds and looks very well ..   mac
>
>
>
> ----- Original Message ----- 
> From: "Alan Leith" <aleith at syd.eastlink.ca>
> To: "'ICOM Reflector'" <icom at mailman.qth.net>
> Sent: Thursday, April 23, 2009 4:26 PM
> Subject: [ICOM] 761 buttons
>
>
>> I'm looking for a matching set of UP/DOWN buttons for my 761.  I assume
>> these are the same on the 765.  When I say "matching" I mean that the
>> print
>> is the same size.
>>
>> For some reason (and it is the only one of the buttons to have done so) I
>> have worn off the "UP" on that button.  I replaced it with another that I
>> had taken off years ago but it is different from the "DOWN" button.  I'm
>> anal enough to want to have them identical as to colour.
>>
>> BTW, ICOM's original buttons were not of particularly good quality and
>> they
>> were replaced.  I had a set of the new ones (that didn't wear badly) but
>> the TS and UP buttons didn't stand up.   I have a "new" TS button but I'm
>> too lazy to take the panel off the front of the radio.
>>
>> If you can help, please contact me off reflector.
>>
>> 73
>>
>> Al, VE1AL
>>
>>
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html