[ICOM] Icom IC-765 question

[Mike Olbrisch]

The controls are resistors I believe.  I think the first thing I would do is a
shot of contact cleaner followed by a shot of De-Oxit  D-5 in the controls.
While you are in there - treat all the controls.  While in the radio, loosen and
retighten all the screws holding the circuit boards - checking the ground
connections so to speak.

If that doesn't do it, voltage regulator???  

You might ask Scott Malcolm - MTS at trip.net.  He is a great source - and will fix
it if you decide to send it off.


Good luck.

Mike - KD9KC.
El Paso, Tx.
DM61rt

Molon labe. [mo-lone lah-veh] Google it...

=============================================
The United States Constitution (c) 1791. All Rights reserved.
=============================================  

> -----Original Message-----
> From: icom-bounces at mailman.qth.net 
> [mailto:icom-bounces at mailman.qth.net] On Behalf Of John K9UWA
> Sent: Saturday, November 29, 2008 9:37 AM
> To: icom at mailman.qth.net
> Subject: [ICOM] Icom IC-765 question
> 
> 
>    My Icom IC-765 has some problem with the IF-Shift / Pass 
> band Tuning.
> 
>    John k9uwa