[ICOM] Icom radio topics

[Jim Miller]

Just wondering if you have any of the optional filters in your 706.  Without
them, the 706 is quite broad.

73, Jim

----- Original Message ----- 
From: "Paul Gates, KD3JF" <pearly732003 at yahoo.com>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Saturday, March 29, 2008 8:57 PM
Subject: Re: [ICOM] Icom radio topics


I live in a noisy area and my 706G could not handle
the noise no matter what. I turned the PreAmp off and
the attenuator on and that helped some and the DSP did
nothing. The TenTec Delta handles the noise a lot
better. I recently purchased a 703PLUS and the
receiver is terrific.. Too bad they don't have that
receiver in the 706G. I trust the receiver in the 7000
is improved froom the 706G

Also the only way I could get full out put on my 706G
was at 13.5 volts... 12 volts and the power was
drastically reduced.

Paul Gates, KD3JF
--- Larry Benko <xxw0qe at comcast.net> wrote:

> Please take a look at any of these topics if they
> interest you.  I am
> not selling anything.
>
> A comparison of the output power of the IC-7000 and
> the IC-706mkIIG in a
> mobile environment
>
http://www.bnk.com/W0QE/Mobile/IC7000_vs_IC706_mobile_pwr.html
>
> Why some Icom radios operate better on 60m than
> others
>
http://www.bnk.com/W0QE/Radio_Measurements/60m_operation.html
>
> RF timing from several Icom radios when interfacing
> to an external
> amplifier
>
http://www.bnk.com/W0QE/Radio_Measurements/amplifier_timing.html
>
>
> 73,
> Larry, W0QE
>
> ----
> Your Moderator: Dick Flanagan K7VC:
> icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>




____________________________________________________________________________
________
No Cost - Get a month of Blockbuster Total Access now. Sweet deal for Yahoo!
users and friends.
http://tc.deals.yahoo.com/tc/blockbuster/text1.com
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/