[ICOM] IC-706 Mk II no transmit audio

[Peter Markavage]

You don't need any other equipment to try it in AM or FM. You should be
able to monitor modulated output on the RF output meter if you got audio
and RF. At least you know it's not the finals. It could a broken mike
lead in the cable, mike housing, or the connector. Sometimes moving,
light squeezing or twisting of the cable near the connector or at the
mike housing can bring it back to life, even if only momentarily, if you
have a broken or intermittent connection.

Pete

On Sat, 28 Jun 2008 22:31:19 -0400 "Stephen Budensiek"
<kzerosd at gmail.com> writes:
> Peter,
>    Can't do that till I get home and have other equipment.   It 
> works
> OK on CW and RTTY, put's out good power.   I'm using the factory 
> stock
> microphone.
> 
> 73's de Stephen, K0SD in So FL
> 
> **********************************
____________________________________________________________
Summer Spa Sweepstakes
Enter for your chance to WIN a Summer Spa Vacation!
http://thirdpartyoffers.juno.com/TGL2141/fc/JKFkuJi7Ubff53UW5EZLq82iBycw8EIPJrlCI3ptRBAPhJfEk5kUsf/