[ICOM] IC-706 Mk II no transmit audio

[Stephen Budensiek]

Peter,
   Can't do that till I get home and have other equipment.   It works
OK on CW and RTTY, put's out good power.   I'm using the factory stock
microphone.

73's de Stephen, K0SD in So FL

**********************************

On Sat, Jun 28, 2008 at 9:03 PM, Peter Markavage <manualman at juno.com> wrote:
> Try it on AM or FM to see if you get carrier and can modulate it.
> Pete
>
> On Sat, 28 Jun 2008 20:30:48 -0400 "Stephen Budensiek"
> <kzerosd at gmail.com> writes:
>> Hello all,
>>    My 706 Mk II has been in storage for a couple months.   Got it
>> out
>> today to use on 6 meters for field day, only to discover there is
>> no
>> transmit audio.   All was OK when I pulled it from my old car a
>> couple
>> months ago.  Output is OK on CW, but tried ssb on 80 thru 6 meters,
>> absolutely nothing out.   Tried it with head plugged directly onto
>> the
>> radio body, as well as using the extention cable, didn't work
>> either
>> way.   I checked the setup menu, mic gain is at 10.   Anyone else
>> seen
>> a problem like this?   Don't have any test gear or manual available
>> till I get back home next week, thought I'd see what other's have
>> experienced.  Radio is about 6 years old, this is the first time
>> I've
>> seen this problem.   Is the mic element a prime suspect, or
>> contacts
>> from head to body, or ?
>>   Thank you.
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>>
>>
> ____________________________________________________________
> Smart Girls Secret Weapon
> Read Unbiased Beauty Product Reviews, Get Helpful Tips, Tricks and Sam
> http://thirdpartyoffers.juno.com/TGL2141/fc/JKFkuJi7U3yDmkv2kWH4vwksH4bx312vWWUvuYFU0cCTweStw3P1OX/
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>