[ICOM] R-71A

[sdaitch at KUW.IBB.GOV]

David,

Dick is correct.  

Thanks for input. 

This particular lamp is between the SO-239 RF connector and
the input to the RF board.  It is used as a fuse.  I've got 
numerous mini-bulbs, about the right size and they would 
fit physically, and considering the cold resistance of a lamp
and the power capabilities of lamps in that physical size,
I might guess in the application, the actual replacement part
isn't that critical.

73
Sheldon

----- Original Message -----
From: Dick Flanagan <dick at k7vc.com>
Date: Tuesday, June 3, 2008 2:19 am
Subject: Re: [ICOM] R-71A

> At 04:57 PM 6/2/2008, David wrote:
> >According to my service manual for the 71A DS1 is an LED P#
> >SLC26UR and DS2 is a lamp P# BQ044-32582A
> 
> That particular DS1 on the display unit is the main display module.
> 
> The lamp Sheldon is referring to is DS1 on the RF Unito.  It is 
> shown 
> on the RF Unit schematic diagram, but not on the RF Unit parts list.
> 
> Dick
> --
> Dick Flanagan K7VC NV SM
> dick at k7vc.com
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>