[ICOM] PRO3 and SignaLink USB

[Gary P. Fiber]

Allan,

You using the Tigertronics SignalinkUSB? If so you might want to go to 
their web page and have a look at the FAQ. Also there are some jumpers 
internal to the unit that need to be installed. They merely plug into a 
header inside. That unit will not operate FSK on AFSK so you can't use 
RTTY mode on your radio but need to use SSB  for HF RTTY. It will 
receive fine without installing the internal jumpers, jut not transmit 
any audio.

Gary K8IZ

allan1 dejazzd.com wrote:
> I wish to operate RTTY.  I know that the PRO3 only has MACROS for XMT.  I purchased the SignaLinkUSB assuming that I could just hook it up with the supplied acc1 cable to the unit.  I am using MMTTY so I can receive on a large screen.  I can view RTTY in LSB as well as the RTTY mode.  However when I go to transmit the MMTTY Macros of just XMT I only have power on the PO meter in the RTTY
>   
> ------------------------------------------------------------------------
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/