[ICOM] RE: Icom Digest, Vol 5, Issue 16

[Mike Olbrisch]

HM-14s are getting hard to find.

I had one go bad due to sun on the plastic.  So over the last few years I have
been shopping for them.  I have one working spare and one broken spare (parts).
E-Bay is a good place, but be prepared to go $50-$60 for one.

You might consider an HM-23.  Seems to be the same except for the up-down lock
button.  Still hard to find, but adds a possibility.

Mike - KD9KC.
El Paso, Tx.
DM61rt

ΜΟΛΩΝ ΛΑΒΕ (Molon labe. [mo-lone lah-veh] Google it)

=============================================
The United States Constitution (c) 1791. All Rights reserved.
=============================================  

> -----Original Message-----
> From: icom-bounces at mailman.qth.net 
> [mailto:icom-bounces at mailman.qth.net] On Behalf Of West, John D
> Sent: Monday, January 21, 2008 10:32 AM
> To: icom at mailman.qth.net
> Subject: [ICOM] RE: Icom Digest, Vol 5, Issue 16
> 
> 
> 
> Hello fellow ICOM users,
> 
> I am looking for an HM-14 Microphone for my 3200A dual band 
> transceiver.
> 
> Any sources out there?  ICOM is fresh out.
> Thanks..jw  K5JDW
> 
> **************************************************************
> *********
> 
> This electronic transmission contains information from 
> Methodist Health System and should be considered confidential 
> and privileged.  The information contained in the above 
> messages is intended only for the use of the individual(s) 
> and entity(ies) named above.  If you are not the intended 
> recipient, be aware that any disclosure, copying, 
> distribution, or use of this information is prohibited. If 
> you receive this transmission in error, please notify the 
> sender immediately by return e-mail.  Methodist Health 
> System, its subsidiaries and affiliates hereby claim all 
> applicable privileges related to the transmission of this 
> communication.
> ----
> Your Moderator: Dick Flanagan K7VC: 
> icom-owner at mailman.qth.net Icom Users Net: Sundays, 1700Z, 
> 14.316 MHz Icom FAQ: http://www.qsl.net/icom/