[ICOM] IC-245 Help Needed..

[Jim Hargrave]

Scott,

Glad you got the display working. Also your fortunate that the pin mod has
been accomplished also. Your description sounds like maybe you have a real
late model and the feed thru pins may have been a factory installation.

The SSB audio drive is controlled by R-72. Also check your pushbuttons and
make sure they are routing the mic to the SSB unit. Be sure you are using
the mic connector on the SSB unit. The original upper mic connector on the
actual radio did not switch down to the SSB unit. It only worked on FM.
However the lower Mic connector on the SSB unit worked for both SSB and FM.


* 73's Jim W5IFP *
>

>  -----Original Message-----
>  From: icom-bounces at mailman.qth.net
>  [mailto:icom-bounces at mailman.qth.net]On Behalf Of KBØNLY
>  Sent: Sunday, February 10, 2008 12:00 AM
>  To: ICOM Reflector
>  Subject: Re: [ICOM] IC-245 Help Needed..
>
>
>  Ok, i got the display working..
>
>  Now there is no transmit audio on SSB but its fine on FM.  What
>  am i missing
>  here?  I checked the connections at the mic jack, no problem,
>  besides that
>  would affect FM as well.  So i'm guessing i have this narrowed
>  down to the
>  SSB adapter.  Is there a mic gain adjustment on it?  I know
>  where the mic
>  gain adjustment is on the top of the radio but that only seems
>  to affect it
>  on FM.
>
>  Any ideas??
>
>  73,
>
>  Scott KBØNLY
>
>
>  ----
>  Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>  Icom Users Net: Sundays, 1700Z, 14.316 MHz
>  Icom FAQ: http://www.qsl.net/icom/