[ICOM] Icom MB5 mobile bracket and other Icom items FS

[Ken Simpson, W8EK]

Icom IC-MB5 Mobile bracket  and other Icom items for sale:


The MB5 mobile bracket fits the Icom IC-718, 728, 735, and others.
It is a heavy duty mobile mounting bracket about 9 1/2 inches wide.  
Please check your manual to see if it fits your rig.

This bracket is new, still in its original box, with the paper work and 
the sealed packet of hardware.  It has never been out of the box.

AES sells these for about $66.  You can have this one for $35.


Icom BP-3 battery pack - dead
I have a dead BP-3 battery pack.
These packs are used on the IC-2 AT, 3 AT, 4 AT, 
02 AT, 03 AT, 04 AT, and several others.  They will 
also fit some of the Radio Shack / Realistic HTs such 
as the HTX-202 and HTX-404. 
This pack is dead, but if you need a battery shell, to 
put a new "insert" in to, it would be ideal.  
Or add a regulator for 12 V DC use.  $ 8 

Icom HM-8 hand mic with Touch Tone (DTMF) Pad
This mic is being sold for parts only. The dynamic element 
in it is open. A part of the plastic holding the PTT button 
does not seem quite right, but the actual touch tone pad 
and electronics is OK. So if you have an HM-8 with bad 
electronics or actual touch tone pad, this unit will get you
 up and going again. Actually, the unit probably can be 
repaired and used. $12

CES 600 L, Universal DTMF microphone
This has a normal touch tone pad on the front, along with 
a low impedance microphone. This one has the 8 pin 
modular plug (like a computer LAN) on it. This mic has 
not been used, so it is in really great condition. 
Paper work included for $40.

Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at speakeasy.net or W8EK at arrl.net
Voice Phone  (352) 732-8400