[ICOM] 746 pro auto tune problem

Denis Barton denisbarton at bellsouth.net
Sat Sep 15 09:07:07 EDT 2007


Hi Ed,

 I had the same problem as you with my IC-756Pro. (Twice) My problem 
happened when using the tuner on 6 Meters into a high SWR. After that the 
tuner worked ok on 6 Meters but stopped working on HF. Icom repair replaced 
a relay in the tuner and that fixed it.

Denis WB8SKP

----- Original Message ----- 
From: "Ed Yeary" <w4tey at bellsouth.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Thursday, September 13, 2007 9:49 AM
Subject: [ICOM] 746 pro auto tune problem


Well I have discussed my problem with Icom in WA. and in Spartanburg S.C. at 
the repair center there. They say there is no issue with the auto tuner 
being operated on 6 meters causing failure or sticking or etc. on the rest 
of the bands when operating the auto tune. I know this goes against what I'm 
seeing on the list but in any case I guess this is way over my head so the 
radio is going to see the doctor in Spartanburg. They said this was a fairly 
complex issue and needed to be sent out. Thanks for all your responses. I 
will let you know what happens as I go through the waiting and return of my 
baby from Spartanburg. 73
Ed Yeary
W4TEY






----
Your Moderator: Dick Flanagan K7VC,
(and temporarily N8TFD/Steve): icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/ 



More information about the Icom mailing list