[ICOM] Help with Icom 735

[GGLL]

	Maybe you have a faulty bias regulator, then final (or could be the 
drivers also) transistors take a lot of current even in standby (rx).
If the power supply you use to feed it has a current meter you could 
note this.

Best regards
Guillermo - LU8EYW.

Kevin Gray escribió:
> Have an Icom 735 that is blowing F1 Fuse which is on the PA Board
> 
>  
> 
> Rig turns on then the fuse blows in a couple seconds.  
> 
>  
> 
> Any help appreciated.
> 
>  
> 
> Kevin
> 
>  
> 
>  
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 
>