[ICOM] IC-765 Repair Question

[Donald Sanders]

The knob on the 735 is about 1.5 to 2 inch diameter and has a finger
depression. The optical encoder is inside and similar on all the Icom rigs I
believe. Mine froze up after 23 years.

Healthfully yours,
                          Don W4BWS
----- Original Message ----- 
From: "Lars E. Pettersson" <lars at homer.se>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Monday, November 19, 2007 1:26 AM
Subject: Re: [ICOM] IC-765 Repair Question


> On 11/19/2007 02:42 AM, Donald Sanders wrote:
> > That is the same problem I had with the IC735 and the same fix.
>
> Is the tuning knob on the IC-751A similar to the 765 and 735? The tuning
> knob on my IC-751A also seem a bit hard to turn, perhaps the solution is
> the same for that one.
>
> 73 de Lars, sm6rpz
> -- 
> Lars E. Pettersson <lars at homer.se>
> http://www.sm6rpz.se/
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>