[ICOM] Icom 761 cant communicate with Logger32

[Gary P. Fiber]

George,

The CI-V switch settings are shown on page 26 of the IC-761 manual.
The switch settings are from the factory as they appear on Page 26 of 
the IC-761 manual.

Switch 1 & 2 sets the baud rate,  Switch 3 sets the transceive flag on 
or off  and  Switches 4, 5 & 6 set the frequency band of the transceiver.
Only play with switches 1,2 & 3 on Switch 1.  Switches 4,5 & 6 tell a 
connected radio used in tranceive mode what the radio is and the switch 
positions shown in the manual are correct for that.

Go to http://www.icom.co.jp/world/support/index.html    you can grab the 
UX-14 manual as well as the IC-761 manual. The site has a nice search 
feature so typing in the model number will bring up the manual.

The 716 CI-V board appears to be a UX-14 so I went to that manual for 
the address switch settings. I have no idea why Icom did bot publish 
just a little more of an explanation in the 761 manual.

Switch 2 :

1   2   3   4   5    6    <- Switch positions
1   2   4   8  16  32   <- Switch numerical value

So for the IC-761 Switches 2,3,4 & 5 are ON. That says the IC-761 
transceiver CI-V address is 2+4+8+16 = 30 decimal or 1EH

The fastest the IC-761 will communicate is 9600 baud and is factory set 
at 1200 baud.

Hope this helps.

Gary K8IZ


 

George wrote:
> I am have a lot of trouble getting my IC-761 to talk to my Logger32 
> program??? Does anyone have the switch settings for S1 and S2 in the 
> bottom of the 761? Also, what values did you use for Logger32 RADIO1?
> Thanks
> George W2YJ
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>