[ICOM] IC-706 Band info output decoder

[Larry Winslow]

Assuming that the voltages are the same as for the older Icom rigs, the 
ARRL handbook has an entry for exactly what you're looking for. I know 
it's in the 2006 issue.

73 - Larry WØNFU
larry_w at comcast.net


Ekki Plicht (DF4OR) wrote:
> On Monday 12 November 2007, k3hx at verizon.net wrote:
>   
>> I'm looking for a diagram for a decoder to take the
>>
>> band information output of the IC-706 (original) and
>>
>> produce a relay closure.
>>     
>
> I don't have a ready to use diagram, but I would start with a bar/dot graph 
> circuit like the LM3916 or similiar. You need only very few components, as 
> you can see from the datasheet.
>
> http://www.national.com/ds/LM/LM3916.pdf
>
> 73,
> Ekki, DF4OR
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>
>