[ICOM] messages

[David Ring]

Thank you.  There must have been quite a delay in forwarding the
message so I assumed the problem (that was fixed it appears) of the
CAPS in the message was causing a problem for me.

I hope that despite the irritation of using the Delete key, that some
find the info useful.  I certainly did.

I'm posting this to the reflector - just to see if it goes through.

Some reflectors are also set up so that the sender doesn't see his own
post - but when I posted on another subject, I saw my own post.

The matter is solved - a huge delay - over 12 hours - in posting!

73

David N1EA


On 5/20/07, R. Crocker <rcrocker at visuallink.com> wrote:
> Hi David.
> (3) of your messages have come thru in the last hour.
> 73, Royce - W3IF
>
>
> ----- Original Message -----
> From: "David J. Ring, Jr." <n1ea at arrl.net>
> To: "icOM Reflector" <icom at mailman.qth.net>
> Sent: Saturday, May 19, 2007 12:16 AM
> Subject: [ICOM] Modifications - Never Seen These Mods !
>
>
> I've tried to send this message twice:  The original title had "ICOM
> Modifications - Never Seen These Mods ! " as the title.  I remember
> QTH.net had a filter that deleted messages with the first word in the
> subject being all caps.  So here it is again!
> ====================================
>
> I've never seen the mods on this page before.
>
> I bet the mods for the 703 just might work on a similar radio - the 706?
>
> The author also reports that the AM detector on the IC746PRO is a
> synchronous detector!  He has a long pdf on mods for that radio.
>
> http://www.kongsfjord.no/dl/dl.htm
>
> 73
>
> David N1EA
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>
>