[ICOM] 706MKiiG with AT-180

[David Aukamp]

The instructions with the IC-7000 indicate that when connecting a 
AT-180 you can use either of the receptacles on the tuner suggesting 
a daisy-chain configuration. I used my tuner with a 706m2g previously 
and believe it to be the same. Whether all 13 lines are delivered to 
the tuner is unclear. As you, I have no independent documentation for 
the AT-180. Hope this helps. Dave-K4QT


At 04:03 AM 5/7/2007, you wrote:
>Message: 1
>Date: Sun, 06 May 2007 07:35:46 -0400
>From: Joe <jbarkley at vnet.net>
>Subject: [ICOM] 706MKiiG with AT-180
>To: ICOM Reflector <icom at mailman.qth.net>
>
>I would like to know if when you have a 706 hooked to the AT-180 that
>the other ACC plug on the
>AT-180 is functional as the ACC to the 706. It is the 14 pin one not the
>9 pin . I have a device that uses
>that 14 pin on the 706 and the at-180 Takes that up when it is inline
>but has another 14 pin below where you hook to the AT-180.
>The only "manual" I can find is the one page out of the 706 book, which
>does  not explain it
>Thanks
>Joe